Mini-MPCNC Build Log – Project Introduction and Goals
Mini-MPCNC Build Introduction – Goals
Welcome to Snaphwhole.com Mini-MPCNC Build Log
I want to build a CNC machine so I can explore how it can be used on my other projects, it made sense to start small
I looked at just about every 3d printer/CNC machine on thingiverse.com, and finally chose the Mini-MPCNC to build for a CNC Machine for engraving and drawing, and use it to experiment and explore how useful it can be
I will do a Build Log for this system – https://www.snapwhole.com/index.php/cnc-projects/
Some of the reasons I chose the Mini-MPCNC
½ conduit Frame – locally sourced, inexpensive, easily replaced
Mostly Printer – The rest of the Frame was easily printed
Size- Pick your size! Start small and go big – I chose small
Control – Arduino
Control – Ramps board
Control – stepper Drivers
Software – Marlin etc
Lots of choices – My Choices
Size – X-Y-Z – 200x200x200 – 8x8x8
Tool Mount – Universal Tool Mount with intent to use HF trim router
Software – Marlin
The design does not have a lot of built in scalability – If I want bigger, I will need to upgrade to MPCNC, ¾ inch Conduit and re-print Everything!
But the electrics will transfer to the MPCNC
Mini-MPCNC Project IntroductiMini-MPCNC Build Log – Project Introduction and Goalson and Goals
